Lumotech/fulham L05031 L1W1MID140S-30E LED Driver 30W, 6-42 Vdc, 100 - 1400 mA
The L05031 L1W1MID140S-30E delivers 62 adjustable currents from 100 to 1400 mA. Easy to set up via dip switches with steps 20mA.
The Dim input can be controlled by a standard controller of 0/1-10V (range 0-100%), a potentiometer of 100K log. (range 0-100%) or a pulse switch (range 3-100%). A short pulse allows the LEDs to be turned on and off. The driver is four times protected: Thermal, against short circuit on the secondary side, against overload and unloaded use.
Product features.
- Wide output voltage range 6 - 42 Vdc
- Wide range of current settings 100 - 1400mA
- 0-10V-, 1-10V-, potentiometer- and pulse dimming
- Zero ripple current
- Automatic dim mode detection
- Suitable for warm dimming (natural toning/ dim-to-warm) LEDs
- Max inrush current 0.88 A
- Dual stage topology
- Thermal protection: dimming instead of switching off
- Open circuit output voltage protection
- Up to 88 % efficiency across a wide range of loads
- Power factor 0.97
- ENEC certified
- Engineered in Europe
- SELV
- Size: LxWxD: 110 x 52 x 23.5 mm
- TECHNICAL DATA / Instructions for use
