Wide choice of spotlights and very suitable as residential lighting, project lighting and lighting at the workplace. Our spots can easily be combined with LED lamps GU10 or Gu5.3 and LED modules, also possible dimmable.
A recessed spot is placed recessed in a ceiling and often have a limited protrusion, making a recessed spot less noticeable than a surface-mounted spot. The recessed spotlights can be supplied both tiltable and fixed and there are many different colors available. Do you want to install recessed spotlights? You should first check which spots are suitable for your project. Look at what kind of ceiling you have. For a concrete ceiling you need luminaires with leaf springs. For a normal plasterboard ceiling you can use normal clamping springs. Also take into account the installation depth. Not all spots have the same installation depth! And the most important thing is of course that you choose what you like and that it fits well in the room in which they are placed.
With the recessed spotlights from R&M Lighting you will enjoy your lighting for many years.
Surface-mounted spotlights are an ideal solution if no recessed luminaires can be placed. For example if there is not enough space in the ceiling or if no holes can be made in a concrete ceiling. Surface-mounted spotlights can often also be placed on a wall and are available in fixed and directional versions. Spot lighting can be used in shops and offices, but also very suitable for home lighting. Place a number of surface-mounted spotlights in the living room. This gives the room more atmosphere and if you use a dimmer, you can dim the spots for a romantic evening.
Many different spots are available. Also spots with multiple light points. You can then illuminate a number of places in the room with 1 spot. This is very useful if you only have 1 central box in the ceiling and do not want visible cables over the ceiling.
Bathroom spots are usually adapted for use in a wet room. They usually have an IP number (IP meaning). This allows you to see where the spot can be placed in the bathroom. It is not advisable to use an open spotlight close to the shower. The water can penetrate the spot and a short circuit can occur!
That is why spots with a seal have been made. There are bathroom fixtures that are IP21 and these are then protected against water drops. These should not be near the shower. For this you must use IP 44 or higher, but an IP21 lamp is sufficiently protected in a place where there is little chance of water splashes. Take a good look at the zone layout in the bathroom and determine which sealing class you need. Also take into account the material of the lighting that you are going to place in the bathroom, glass cannot rust, but normal metal can. Aluminum is very suitable for lamps in the wet room, it does not rust.
A bathroom surface-mounted spot IP44-65 often have a rubber seal. This prevents water from entering the fixture. Often a rubber ring is used in the lid of the spot. Because of this it is still possible to open the spot and, for example, replace the light if it breaks.
Built into the ceiling, these trimless recessed spotlights have no protrusion and are equal to the ceiling. Great for if you like a very tight ceiling. There are different types of rimless recessed spotlights: with built-in LED or with a removable lamp, usually this will be a GU10 lamp. Keep in mind that you have enough space in the ceiling and if you are going to build a new home, make sure that the spotlights are taken into account. Cut-out boxes can then be placed in the ceiling during construction. In this, the spotlights can be placed later.
Feel free to contact us! You can always call us or use the contact form. We are happy to answer your questions, give you more information or help you choose the right lighting!
