Delivered without cover plate and window, these are available separately in various designs.
Switching and dimming incandescent lamps, HV halogen lamps and dimmable inductive transformers or electronic transformers with halogen lamps and LED lamps
Suitable for mixing load up to the specified total power
Suitable for a maximum of two lamp groups via the two independent outputs a1 and a2
Installation in flush-mounted box in accordance with DIN 49073
Can be combined with suitable cover
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic thermal protection
Switch on lamp saving thanks to soft start
Power expansion through power amplifier
Different types of load are possible on both outputs.
Asymmetrical load distribution possible
Automatic adjustment of the dimming principle suitable for the load
Connection of several 2-wire extension connections possible
AC 230 V ~, 50/60 Hz
Tax per exit:
50 ... 260 W / VA
Load types: 230 V incandescent lamps (ohmic load, phase cut-off) 230 V halogen lamps (ohmic load, phase cut-off) Electronic transformers (capacitive load, phase cut-off) Inductive transformers (inductive load, phase cut-off)
Mixed loads allowed (no capacitive and inductive loads together).
With mixed loads with inductive transformers, do not exceed 50% of the ohmic load.
max clamping range:
2 x 2.5 mm2 or 1 x 4 mm2